A new high performance epoxy adhesive that applies to wet or dry surfaces for complete waterproof bonding. Trust Selleys Aqua Fix to stick when wet – even underwater
Features: - Can be applied to wet and dry surfaces
- 100% water resistant
- Use on multiple surfaces
- Strong durable bonding
- Sticks and sets underwater
- Withstands thermal and mechanial shocks
- Temperature range -15degree (continuous) to 80degree (intermittent)
Availble Sizes Safe to use on Tiles, Metal, Timber, Rubber, Glass, Leather, Most plastics(not for polyethylene, polypropylene)
How to use this product - Ensure surfaces to be bonded are clean, free of grease, dirt and loose materials.
- For best results roughen bond area, prior to cleaning.
- Dispense equal parts onto a clean disposable surface and ix together thoroughly to a uniform colour.
- Mixed glue remains usable for 1 hour. Apply mixed glue to both surfaces of job then bring together.
- Do not apply undue strain to bond for 6-8 hours.
- Hold joint in place using tapes, clamps or weights if necessary for 24 hours.
- When applying underwater ensure mixed glue is pushed onto surface firmly until the glue displaces water and adheres to surface.
Handy tips - For Aquariums allow to cure for at least 72 hours, then thoroughly wash out with water, drain and refill before introducing fish.
- Not approved for contact with drinking water – use Selleys Knead-It Aqua.
Storage and re-use - Place cap from plunger on nozzle for storage
- Clean up uncured Aqua Repair Glue with acetone (nail polish remover)
